06 户西跳桌刀 HANDRAIL CLASSICAL BIT Part No. D H B R d WJ06001 38.00 16.00 12.50 4.00 8.00 WJ06002 50.00 22.00 18.50 6.00 8.00 07 跳桌框架线刀 HANDRAIL CLASSICAL BIT Part No. D H B R d WJ07001 40.00 14.00 13.50 4.00 8.00 WJ07002 53.00 20.00 20.00 6.00 8.00 08 平底双R线刀 CLASSICAL PLUNGE BIT Part No. D H d L WJ08001 24.00 11.50 12.70 45.00 WJ08002 30.00 12.50 12.70 45.00 WJ08003 38.00 12.00 12.70 45.00 09 双边框R刀 CLASSICAL PLUNGE BIT Part No. D H d L WJ09001 25.20 11.90 12.70 45.00 WJ09002 38.60 13.20 12.70 45.00 WJ09003 40.00 20.30 12.70 45.00 WJ09004 44.20 18.00 12.70 45.00 注：该类产品可安装轴承3/16＂×3/8＂(4.76mm×9.52mm)做导向，如需要请在订单编号后面加上A以注明。 Note: Such item could be fixed with besring 3/16＂×3/8＂(4.76mm×9.52mm) for cutting direction. If you need, please add“A”following the Part No. respectively.